Home > Operations > CVSA Releases Results from Unannounced ‘Brake Safety Day’; Next Brake Safety Day is Sept. 7

CVSA Releases Results from Unannounced ‘Brake Safety Day’; Next Brake Safety Day is Sept. 7

More than 9,500 commercial motor vehicles were inspected for an unannounced brake safety enforcement event, Brake Safety Day, the Commercial Vehicle Safety Alliance said in July upon releasing results of the event. Enforcement personnel throughout North America conducted inspections on large trucks and buses on May 3 to identify out-of-adjustment brakes, and brake-system and antilock braking system (ABS) violations as part of the Commercial Vehicle Safety Alliance’s (CVSA) Operation Airbrake Program.

The next Brake Safety Day event will take place on Thursday, Sept. 7, at participating jurisdictions throughout Canada, Mexico and the United States.

The goal of Brake Safety Day is to conduct roadside inspections, and identify and remove vehicles with critical brake violations from our roadways in an effort to reduce the number of crashes caused by or made more severe by poorly maintained braking systems on commercial motor vehicles. The event also sought to evaluate how well ABS are maintained in accordance with federal regulations.

Inspection data from the unannounced one-day brake safety enforcement initiative, released July 12 by CVSA, featured the following results:

A total of 43 jurisdictions participated – 33 U.S. states and 10 Canadian provinces/territories.

The United States conducted 8,140 commercial motor vehicle inspections; Canada conducted 1,384.

In all, 9,524 inspections were conducted as part of Brake Safety Day.

79 percent of the vehicles inspected did not have any critical item vehicle violations.

21 percent (1,989) of all inspections conducted resulted in a vehicle being placed out of service for vehicle violations of any kind.

12 percent (1,146) of all inspections conducted resulted in a vehicle being placed out of service for brake-related violations.

Many participating jurisdictions were able to survey ABS compliance, as follows:

4,635 air-braked trucks and tractors were identified as requiring ABS; 8 percent (391) had ABS violations.

3,222 trailers were identified as requiring ABS; 15 percent (487) had ABS violations.

723 hydraulic-braked trucks required ABS; 6 percent (41) had ABS violations.

57 buses required ABS; 11 percent (6) had ABS violations.

Brake Safety Day aims to improve commercial motor vehicle brake safety awareness throughout North America. Brake-related violations comprise the largest percentage of all out-of-service violations cited during roadside inspections. Improperly installed or poorly maintained brake systems can reduce the braking capability and increase stopping distances of trucks and buses, which pose a serious risk to driver and public safety.

Brake Safety Day is part of the Operation Airbrake Program sponsored by CVSA in partnership with the Canadian Council of Motor Transport Administrators (CCMTA) and the U.S. Department of Transportation’s Federal Motor Carrier Safety Administration (FMCSA).

Leave a Reply

Your email address will not be published. Required fields are marked *

*