Oil Burner & Accessories Roundup

This selection of products has been specifically chosen to provide an overview of the new technologies available in oil burners and components. It is by no means a complete list of state-of-the-art equipment currently on the market and is only a sampling of the many fine products available.

REZNOR Introduces New Waste Oil Heater

Thomas & Betts – HVAC Division (REZNOR) announces the addition of Models RA-250 and RAD-250 Waste Oil Heaters to their extensive line of products specifically designed for recycling used oils into free shop heat. The Model RA is a standard unit space heater while the Model RAD is a ductable furnace, designed for ducting heat to wherever it is needed.  Both models are rated for 250,000 BTU input. The new chamber design is efficient and accessible, offering extended run time between clean-outs.  Both models are user-friendly and easy, quick and inexpensive to maintain.  A full, swing-out door, large service panels and convenient maintenance/service shelf provide easy access to the combustion chamber and heat exchanger.   The RA-250 & RAD-250 models can be ceiling suspended or supported above the Reznor Workbench Fuel Tank, forming a practical and convenient Waste Oil Recycling Center.  The models also feature state-of-the-art, efficient air atomizing burner; a quiet, on-board air compressor; positive displacement fuel metering pump; and automatic thermostat-controlled operation, providing consistent, dependable delivery of fuel and excellent combustion.  Other features include a patented oil-preheating system, a backflow ash/draft sensor and operation hour meter.

Beckett’s NX Burner

The Beckett NX Burner includes new advanced burner components that make this the most reliable Beckett ever. And if a problem should occur, Beckett’s new GeniSys control helps a technician locate the problem quickly to get the burner back on line. Standard sound absorbing cover and quiet flame technology make the NX the choice for quiet installations.

IAF’s Nozzle GuardTM NG 3500-G

Industrial & Aviation Filters’ Nozzle GuardTM NG 3500-G is a high efficiency spin-on filter offering features unavailable on competitive models. Nozzle Guard’s exclusive flat-bottom design 1) reduces oil spills, 2) eliminates rusting, 3) lasts longer, and 4) gaskets don’t stick. See www.nozzleguard.com for complete details.

Carlin commercial EZ-Temp boiler control packages

The 99000A EZ-Temp is a pre-assembled and pre-wired operating limit and manual reset high limit temperature control package for commercial boilers and other similar applications.  The 99000B EZ-Temp is a pre-assembled and pre-wired operating limit, manual reset high limit temperature and a two position step modulating controls for commercial boilers and other similar applications.   

Beckett’s GeniSys Display

The GeniSys Display is an optional attachment for the GeniSys Primary Control that enables the technician to access the advanced features of the GeniSys Burner Control. The display communicates the current status and last fifteen cycles of history for easy diagnostics and can also be customized to display a ‘call for service’ message. Through the programming features of the display, the contractor can change/set the Valve-on Delay and the Motor-off Delay timings, and with the addition of an optional alarm module, the GeniSys can be used as a universal control.

Testo’s advanced sensor technology in combustion analysis

The residential/light commercial 330-1 LL combustion analyzer for advance heating technicians features a unique sensor technology with a four year sensor warranty. Additional features include large memory capacity, USB connectivity, 18 fuels pre-programmed and expanded capabilities for an optional NOx sensor and optional probes: ambient CO2, ambient CO and gas leak testing.  It is designed for daily combustion testing on gas and oil systems, carbon monoxide testing, CO2, O2 and efficiency checks, draft, differential temperature and pressure analysis.  Contractor kits come complete with a convenient, wireless infrared printer, an integrated magnetic boot, a rugged molded carry case and a product Quick Start Guide.

Wohler A-500

The Wohler A-500 combines the very latest in analyzer technology, field exchangeable sensors, the industry’s only touch screen user friendly operation and advanced data storage and management capabilities.  An X-large display screen with all combustion readings on one screen, Wohler’s signature Rapid Read-out Technology (R.R.T.) and NOx and SOx capabilities combine to make this feature the best buy for the money.  The A-500 is the ideal tool for the technician who needs to determine combustion efficiency with the option of also testing emission compliance.

Carlin EZ-Temp

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button